4 test the suspect fuses.
Tool to remove fuse from car.
Blade and mini blade pulling tool.
Most fuse boxes will have a diagram displaying the name and location of each fuse.
It is very important to know some aspects of diy automotive maintenance because it could save you from be.
Before removing any fuses it is possible to test a fuse before removing it this requires either a continuity test light or a multi meter ohm meter.
How to change a fuse.
You might need to check the owner s manual but they can usually be found under the steering wheel.
In this video i show you how to replace car fuses.
To remove this blown fuse gently pry it out with your fingers a very small standard screwdriver a small set of pliers or as a last resort a bent paper clip.
You could take a small plastic strip like a tie wrap and thread it under one fuse end to pull it.
Once the fuse panel is located remove the cover and locate the fuse puller most vehicles come with a small fuse puller but not all will have one.
You can lever them out with a small screwdriver or any other lever that is handy.
With the car completely off locate the fuse in question and remove it by grabbing it firmly with the fuse puller stored in the fuse box or with a pair of needle nose pliers.
Locate your car s fuse panel.
Inside you ll see a range of colors and numbers that denote different amperages while a diagram usually on.
Take off the fuse panel s cover.
Buy sca fuse puller set blade 2pce online supercheap auto.
Once you identify the potentially blown fuse you won t be able to tell for sure until after you remove it use a fuse removal tool to carefully and correctly remove the suspected fuse.
Product description littelfuse tri puller fuse puller is designed to protect the power distribution system of the vehicle.
It is constructed from durable material that is corrosion and abrasion resistant.
These handy fuse pullers make easy work of exchanging blown fuses.
Hold the fuse up to the light and.
A good tubular fuse a and a burned out fuse b.
Blade and mini blade pulling toolth1973.
To avoid breaking the fuse try prying up one of the end caps first.
Blade and mini blade pulling tool.