Toilet Lifts Off Floor

With the toilet master jack the toilet is never placed down on the floor so there is no wax mess to clean up.

Toilet lifts off floor.

To do this correctly you ll have to lift the toilet from the floor so you will need to purchase a new wax seal to replace the one you re breaking apart by removing the toilet. The toilet master jack helps eliminate the water mess by reducing the risk of water spilling over the p trap as it tilts water away from the toilet base opening. My tile floor is uneven so any toilet rocks back and forth. Use an adjustable wrench to remove the nuts from the floor bolts.

Not expecting to replace the toilet for a long time i decided to use a tube of quikcrete. Remove the nuts from the bolts with the wrench. This will allow you to remove the old flooring and properly reseat the toilet on top the new floor. Poor install can cause a toilet to wiggle.

Remove the floor bolts. Thanks for your help joe mc govern ricktay. Installing new bathroom flooring requires removal of the toilet. Pry the trim caps off the floor bolts.

Before removing the toilet you will need to disconnect the water supply line drain all the water and remove two nuts. If you re still unsuccessful you may have to use a nut splitter or cut the bolts with a hacksaw. The bolts or screws that hold your toilet to the floor are loose look down by the floor on the flange of the toilet base and you will see two nuts or screws they are loose they can be tightened. And it s sanitary too.

I had traced the outline of the toilet with a pencil before setting it. The thinking behind this is that i needed something that would harden and stop any rocking motion once it set up. Now that toilet bowl has to come up 3 4 to do job right. You don t have to touch the toilet itself.

This will be a good time to inspect your toilet flange too. A few tips to get your toilet refit after a new tile floor is installed. Wood floor 1 2 thick had been added without raising toilet bowl in the past.