Subtract about 3 4 in.
Tile height above tub.
The guest bathroom is a bit small 5x 7.
Code requires that there be a 2 air gap above the overflow rim of the tub.
I am wondering should i tile all the way up the ceiling or leave 8 inches from the top and put a crown or chair rail.
Also what should be the height of the accent border.
I did marble tile to 48 in powder room.
The point where the tub overflows onto the.
Favorite answer i set tile for 30 yrs.
Plus that height kept the very wallpaper we hung above the marble safely away from splashing water.
No skinny tile strips.
If tile is your.
Measure a row of tile to determine the location of the plumb line on the back wall.
Draw level and plumb tile layout lines on the wall to guide your installation.
The classic design feature is usually between 34 and 54 high with 36 being the average height.
In general expect your local codes to specify a minimum height of 6 feet above finished floor height for a dense non absorbent waterproof wall covering within an enclosed shower.
To tile around a tub or shower start by measuring the height of the back wall from the lip of the tub to the top of the area to be tiled.
But we dropped the ceiling over.
I have a tub left drain and the wall has a window 2x 3 18 inches from the ceiling.
I like going all the way plus the ceiling over the tub.
The tub spout should be set 4 above the top edge of the surface of the tub.
And standard is 6 ft over tub and 4 ft the rest of the way.
It s the perfect height for a backsplash behind sink luxe looking and easy to wipe down around toilet.
Divide the dimension in half and make a mark there.
Check if you need to adjust this mark to avoid laying slivers of tile at the top and bottom.
For a truly classic look finish the top with a decorative trim or a bullnosed edge.