For vinyl tile you would still need to install the plywood base but you would not need the felt on top.
Tile floor over concrete slab.
Before you begin to lay the tile over your concrete slab make sure the concrete is properly prepared.
Guide to installing tile over concrete slabs tiles can be applied directly to a clean smooth concrete slab with a latex portland cement mortar.
Tsp is a high strength cleaner which is useful for removing dirt grease and oil from your existing surface.
Consider adding a rug to your ceramic tile basement floor to help warm up the floor.
If your floor is flat stable and free of large cracks you can lay ceramic tile directly over your concrete.
It s perfectly acceptable to put tile directly on concrete with a couple of caveats.
Mix up a bucket of tsp tri sodium phosphate solution.
When installing a ceramic tile floor on a concrete subfloor you don t have to worry about flexing as long as the concrete slab is at least 1 1 8 inch thick which most slabs are.
If you attach the tile to concrete you need to take special precautions by uncoupling the tile from the concrete.
Luxury vinyl tile or planks.
Luxury vinyl emulates the look of hardwood or tile with increased moisture resistance.
Vinyl ceramic and rubber tiles are all great options especially for areas like your kitchen or bathroom.
There are 3 different types of tile that you could use over a concrete slab foundation.
However you re not out of the woods.
More than almost any other type of floor covering tile needs a rock solid base.
Because this vinyl type comes in planks or tiles there is potential for tiny gaps that may allow moisture to seep into the concrete substrate.
Concrete expands and contracts and that type of movement can also crack the tiles and the grout.
The concrete should be properly cured be level to 1 4 inch in 10 feet and have a steel trowel or fine broom finish.
Although tile can be placed directly over a concrete slab products such as schluter s ditra are designed to separate or uncouple the tile from any potential movement in the substrate and protect the tile and grout from cracking.
A concern when it comes to ceramic tile is that it lacks insulation.
Scrub the floor with a brush and tsp and allow it to dry thoroughly.
You can test for moisture.